CORNING 006TU4-T4731D20 6-F MM 50UM OM2 DIELECTRIC PER/1000FT FASTACCESS TECHNOLOGY
Available*
Item # 51210040
Model # 006TU4-T4731D2
$810.00
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Cable
Wire and Cable
Fiber Optic
Aerial
Corning Inc
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
CORNING 006TU4-T4731D20 6-F MM 50UM OM2 DIELECTRIC PER/1000FT FASTACCESS TECHNOLOGY ALTOS® Cable with FastAccess® Technology
Corning ALTOS® cable with FastAccess® technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cable access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 µm and 50 µm, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.
ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess® Technology, 12 F, 50 µm multimode (OM2)
Part Number 006TU4-T4731D20 Product Description ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess® Technology, 6 F, 50 µm multimode (OM2) Fiber Category 50 µm MM (OM2) Fiber Count 6 Weight 73 kg/km (49 lb/1000 ft)
Features And Benefits ?Contains FastAccess® technology Innovative cable jacket feature reduces cable end access time by at least 50 percent and reduces overall risk of inadvertent fiber damage as well as risk to installers from sharp cable access tools ?Medium-density polyethylene jacket Rugged, durable and easy to strip (while providing superior protection against UV radiation, fungus, abrasion and other environmental factors) ?Fully waterblocked loose tube all-dielectric gel-free design Simple access and no clean up ?Industry-standard performance Meets the requirements of Telcordia GR-20, Issue 3 and ICEA S-87-640 ?Available in 62.5 µm, 50 µm, single-mode and hybrid versions Ready for any application including Gigabit Ethernet and 10 Gigabit Ethernet
picture is of 36-F ALTOS All-Dielectric Cable with FastAccess Technology, Gel-Free, 36 Fibers | Photo PIM2547
Corning ALTOS® cable with FastAccess® technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cable access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 µm and 50 µm, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.
ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess® Technology, 12 F, 50 µm multimode (OM2)
Part Number 006TU4-T4731D20 Product Description ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess® Technology, 6 F, 50 µm multimode (OM2) Fiber Category 50 µm MM (OM2) Fiber Count 6 Weight 73 kg/km (49 lb/1000 ft)
Features And Benefits ?Contains FastAccess® technology Innovative cable jacket feature reduces cable end access time by at least 50 percent and reduces overall risk of inadvertent fiber damage as well as risk to installers from sharp cable access tools ?Medium-density polyethylene jacket Rugged, durable and easy to strip (while providing superior protection against UV radiation, fungus, abrasion and other environmental factors) ?Fully waterblocked loose tube all-dielectric gel-free design Simple access and no clean up ?Industry-standard performance Meets the requirements of Telcordia GR-20, Issue 3 and ICEA S-87-640 ?Available in 62.5 µm, 50 µm, single-mode and hybrid versions Ready for any application including Gigabit Ethernet and 10 Gigabit Ethernet
picture is of 36-F ALTOS All-Dielectric Cable with FastAccess Technology, Gel-Free, 36 Fibers | Photo PIM2547
