GMP General Machine Products 89005 Pusher Rod Metric with Power Pack
Available*
Item # 31252510
Model # 89005
$25,605.15
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
RODDERS
Tools
Line Construction- Placing
Rodders- Duct
GMP General Machine Products
Rodder Accessories
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GMP General Machine Products 89005 Pusher Rod Metric with Power Pack
GMP General Machine Products 89005 Pusher Rod Metric with Power Pack
P/N 89005 Powered Duct Rod Pusher Calibration in Meters Weight: 210 lbs. (95kg)
SPECIFICATIONS: Capacity: 1000' x 1/2" (12.7mm) fiberglass rod Speed: Up to 130'/min (40m/min)
Force: Pushes and pulls with forces up to 300 lbs. (136kg) Drive: Dual hydraulic motor tractor belt drive
Controls: Emergency stop switch, power on/off button, hydraulic on/off control valve, hydraulic pressure display gauge, directional lever, speed control, speed and distance indicator
Height: 39" (99cm) Length: 42" (107cm) Width: 27" (69cm) Weight: 210 lbs. (95kg)
Powered Duct Rod Pusher With GMP's Powered Duct Rod Pusher and a 1/2" GMP Duct Rodder, the job of placing pulling lines or fiber cables in old or occupied conduits just got that much easier with less personnel. Hydraulically powers GMP 1/2" Duct Rodders in to and out of conduits. Pushes and pulls with forces up to 300 lbs. Rod speeds up to 130'/min (40m/min) Accurately measures footage and speed with an electronic monitoring system that works in either direction. The readout can be scaled to feet or meters. When pulling back, the fiberglass rod is placed directly back onto the cassette. Features rod access areas for wiping the rod clean during the pull back operation. Also comes with a package of rod wiper pads (P/N 32290) Duct Clamp on the machine, and the specially designed Duct Mounting Clamp Assembly (P/N 32221) provided on the rodder cassette, help stabilize both pieces of equipment during use. Comes with a gasoline driven power pack and hoses. Pusher is mounted on a lightweight, brightly painted, tubular-steel frame that can be tilted at a 30-degree angle to the manhole to reduce initial bending of the fiberglass rod. Must order 1/2" Duct Rodder Separately. Also, user must provide length of 1 1/4" innerduct between Rod Pusher and Rodder Cassette, and another length of 1 1/4" innerduct between the pusher and the duct to be rodded.
GMP General Machine Products 89005 Pusher Rod Metric with Power Pack
P/N 89005 Powered Duct Rod Pusher Calibration in Meters Weight: 210 lbs. (95kg)
SPECIFICATIONS: Capacity: 1000' x 1/2" (12.7mm) fiberglass rod Speed: Up to 130'/min (40m/min)
Force: Pushes and pulls with forces up to 300 lbs. (136kg) Drive: Dual hydraulic motor tractor belt drive
Controls: Emergency stop switch, power on/off button, hydraulic on/off control valve, hydraulic pressure display gauge, directional lever, speed control, speed and distance indicator
Height: 39" (99cm) Length: 42" (107cm) Width: 27" (69cm) Weight: 210 lbs. (95kg)
Powered Duct Rod Pusher With GMP's Powered Duct Rod Pusher and a 1/2" GMP Duct Rodder, the job of placing pulling lines or fiber cables in old or occupied conduits just got that much easier with less personnel. Hydraulically powers GMP 1/2" Duct Rodders in to and out of conduits. Pushes and pulls with forces up to 300 lbs. Rod speeds up to 130'/min (40m/min) Accurately measures footage and speed with an electronic monitoring system that works in either direction. The readout can be scaled to feet or meters. When pulling back, the fiberglass rod is placed directly back onto the cassette. Features rod access areas for wiping the rod clean during the pull back operation. Also comes with a package of rod wiper pads (P/N 32290) Duct Clamp on the machine, and the specially designed Duct Mounting Clamp Assembly (P/N 32221) provided on the rodder cassette, help stabilize both pieces of equipment during use. Comes with a gasoline driven power pack and hoses. Pusher is mounted on a lightweight, brightly painted, tubular-steel frame that can be tilted at a 30-degree angle to the manhole to reduce initial bending of the fiberglass rod. Must order 1/2" Duct Rodder Separately. Also, user must provide length of 1 1/4" innerduct between Rod Pusher and Rodder Cassette, and another length of 1 1/4" innerduct between the pusher and the duct to be rodded.
