GMP General Machine Products 70911 400 CFM Aftercooler w/24V Fan w/Foot Kit
Available*
Item # 30934976
Model # 70911
$12,544.20
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
TUGGERS
Tools
Line Construction- Placing
Puller- Tuggers- Winches
GMP General Machine Products
Puller Parts
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GMP General Machine Products 70911 400 CFM Aftercooler 24V Fan w/Foot Kit
GMP General Machine Products 70911 400 CFM Aftercooler with 24V Fan w/Foot Kit
P/N 70911 400 CFM Aftercooler With 24V Fan With Foot Kit
The 400CFM Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Cable Blowing Machine
Features a heavy-duty moisture separator with manual drain for removal of trapped moisture and condensed oil Completely self-contained and packaged in a construction skid with a lifting bail and expanded metal heat exchanger guard
Boss outlet fitting (Boss 28) and inlet fittings (1-1/2 in. Pipe) are standard
DC fan motor is run from the compressor battery and automatically starts when the system is pressurized
13-foot power cord with alligator clips to connect to the compressor starting battery
Optional 1-micron coalescing filter available
Adaptable stand-alone or tongue-mount design
Compact installation does not interfere with vehicle tailgates, etc.
Cools air to within 20° of ambient temperature to optimize moisture removal
Available in either 12 or 24 volt versions
SPECIFICATIONS Length: 24 in. (610 mm) Width: 44 in. (1118 mm) Height: 30 in. (762 mm) Weight: 170 lbs. (77 kg) Fan Power Requirments 9 A, 24 VDC or 18 A, 12 VDC Max Working Pressure 200 psi (13.9 bar) Max Air Compressor Flow Rate 400 cfm (11 M³/Min) Air Hose Connections Output: Boss 28 Input: 1-1/2 in. Pipe
Note: The aftercooler’s fan voltage must be selected to match the compressor’s battery voltage. The following chart shows some compressor manufacturers and the corresponding typical battery voltages: 24 volt-Doosan/Ingersoll Rand 12 volt-Atlas Copco/Sullair
Please confirm the compressor’s battery voltage in your specific application before ordering the aftercooler.
P/N 70911 400 CFM Compressor Aftercooler with 24V Fan Weight: 170 lbs. (77kg) P/N 70910 400 CFM Compressor Aftercooler with 12V Fan Weight: 170 lbs. (77kg)
P/N 74162 Foot kit for 400 CFM cooler (Supplied with 70911 and 70910)
GMP General Machine Products 70911 400 CFM Aftercooler with 24V Fan w/Foot Kit
P/N 70911 400 CFM Aftercooler With 24V Fan With Foot Kit
The 400CFM Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Cable Blowing Machine
Features a heavy-duty moisture separator with manual drain for removal of trapped moisture and condensed oil Completely self-contained and packaged in a construction skid with a lifting bail and expanded metal heat exchanger guard
Boss outlet fitting (Boss 28) and inlet fittings (1-1/2 in. Pipe) are standard
DC fan motor is run from the compressor battery and automatically starts when the system is pressurized
13-foot power cord with alligator clips to connect to the compressor starting battery
Optional 1-micron coalescing filter available
Adaptable stand-alone or tongue-mount design
Compact installation does not interfere with vehicle tailgates, etc.
Cools air to within 20° of ambient temperature to optimize moisture removal
Available in either 12 or 24 volt versions
SPECIFICATIONS Length: 24 in. (610 mm) Width: 44 in. (1118 mm) Height: 30 in. (762 mm) Weight: 170 lbs. (77 kg) Fan Power Requirments 9 A, 24 VDC or 18 A, 12 VDC Max Working Pressure 200 psi (13.9 bar) Max Air Compressor Flow Rate 400 cfm (11 M³/Min) Air Hose Connections Output: Boss 28 Input: 1-1/2 in. Pipe
Note: The aftercooler’s fan voltage must be selected to match the compressor’s battery voltage. The following chart shows some compressor manufacturers and the corresponding typical battery voltages: 24 volt-Doosan/Ingersoll Rand 12 volt-Atlas Copco/Sullair
Please confirm the compressor’s battery voltage in your specific application before ordering the aftercooler.
P/N 70911 400 CFM Compressor Aftercooler with 24V Fan Weight: 170 lbs. (77kg) P/N 70910 400 CFM Compressor Aftercooler with 12V Fan Weight: 170 lbs. (77kg)
P/N 74162 Foot kit for 400 CFM cooler (Supplied with 70911 and 70910)
