GMP General Machine Products 70524 Winch CD3 W/Ball Bearing Drum
Available*
Item # 30934966
Model # 70524
$48,383.66
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
TUGGERS
Tools
Line Construction- Placing
Puller- Tuggers- Winches
GMP General Machine Products
Puller Parts
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
GMP General Machine Products 70524 Winch CD3 W/Ball Bearing Drum
GMP General Machine Products 70524 Winch CD3 W/Ball Bearing Drum
P/N 70524 Winch Adams CD3 Continuous Duty With Ball Bearing Drum Weight: 1600 lbs.(725kgs)
The best cable pulling winch your money can buy for long continuous pulls. Comes in a new reduced size package incorporating the best features of the Adams CD Winches you’ve used for years and loaded with new performance features and value.
Specifically designed for the placement or removal of communication cable or electrical conductors, in both aerial or underground applications
The Adams CD3 Winch is rated for continuous duty in compliance with SAE J706, and has a bare drum pulling capacity of 24,000 lbs. (106.8kN)
Helical gears drive the winch for high efficiency and durable performance
Installation was simplified to give this winch the lowest installed cost compared to any other continuous duty winch in its class
The compact design, 51.85 in. wide, allows easy mounting between the cabinetry of your line trucks
For ease of installation, we supply SAE rated bolt-on mounting brackets. For ease of removal for service or remounting in a new chassis, welding has been eliminated.
Hydraulically driven, our Three Speed Transmission provides true “shift-on-the-fly”, using the two spool valve supplied
Full Load Brake, is a spring applied, hydraulically released. Designed to hold the rated load up to 24,000 lbs. on a bare drum. The brake is non-directional, meaning you can pull-in or power-out when required without overheating.
Level-wind mechanism for 7/16 in., 1/2 in. or 9/16 in. wire rope (specify exact o.d.), which distributes the wire rope onto the drum in tight, even lays. The Level-wind can be supplied in overwind or underwind configuration at no additional charge.
Air-Shift-Clutch makes free spool operation simple. Push a button to engage or disengage the drum clutch and pull off the wire rope
Free-Spool caliper drag brake with remote actuator is supplied to control over spooling
A Drum Guard has been incorporated in the new design to control the cable if the drum is over spooled
Drum Shaft Extension is supplied with each winch, custom made to match the body width of the truck. The maximum allowable pull when using the drum shaft extension is 1,500 lbs. (6.7kN) using a standard 7 in. (18cm) diameter capstan P/N 10727.
GMP General Machine Products 70524 Winch CD3 W/Ball Bearing Drum
P/N 70524 Winch Adams CD3 Continuous Duty With Ball Bearing Drum Weight: 1600 lbs.(725kgs)
The best cable pulling winch your money can buy for long continuous pulls. Comes in a new reduced size package incorporating the best features of the Adams CD Winches you’ve used for years and loaded with new performance features and value.
Specifically designed for the placement or removal of communication cable or electrical conductors, in both aerial or underground applications
The Adams CD3 Winch is rated for continuous duty in compliance with SAE J706, and has a bare drum pulling capacity of 24,000 lbs. (106.8kN)
Helical gears drive the winch for high efficiency and durable performance
Installation was simplified to give this winch the lowest installed cost compared to any other continuous duty winch in its class
The compact design, 51.85 in. wide, allows easy mounting between the cabinetry of your line trucks
For ease of installation, we supply SAE rated bolt-on mounting brackets. For ease of removal for service or remounting in a new chassis, welding has been eliminated.
Hydraulically driven, our Three Speed Transmission provides true “shift-on-the-fly”, using the two spool valve supplied
Full Load Brake, is a spring applied, hydraulically released. Designed to hold the rated load up to 24,000 lbs. on a bare drum. The brake is non-directional, meaning you can pull-in or power-out when required without overheating.
Level-wind mechanism for 7/16 in., 1/2 in. or 9/16 in. wire rope (specify exact o.d.), which distributes the wire rope onto the drum in tight, even lays. The Level-wind can be supplied in overwind or underwind configuration at no additional charge.
Air-Shift-Clutch makes free spool operation simple. Push a button to engage or disengage the drum clutch and pull off the wire rope
Free-Spool caliper drag brake with remote actuator is supplied to control over spooling
A Drum Guard has been incorporated in the new design to control the cable if the drum is over spooled
Drum Shaft Extension is supplied with each winch, custom made to match the body width of the truck. The maximum allowable pull when using the drum shaft extension is 1,500 lbs. (6.7kN) using a standard 7 in. (18cm) diameter capstan P/N 10727.
