Dcd 32900-702 Sheave 7" Wide X 2" Diameter New
Available*
Item # 30513925
Model # 32900-702
$339.31
![Peac Financing](https://sep.turbifycdn.com/ty/cdn/phonetx/ptx-peac-financing.png)
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
SHEAVES
Tools
Line Construction- Placing
Blocks-Placing-Prelashing- Overlashing
DCD DESIGN AND MANUFACTURING LTD
Block Parts
![CA Prop 65 Warning](https://sep.turbifycdn.com/ty/cdn/phonetx/exclamation.png?t=1710857348&)
Product Description
Dcd Design/Cable Spinning Equipment 32900-702 Sheave 7" Wide X 2" Diameter New
All Dcd Design/Cable Spinning Equipment Sheaves Are Cast From 356-T6 Aluminum. This Is A Heat Treated Material Giving Over 33,000 Lbs Of Tensile Strength Making It One Of The Strongest Types Of Aluminum Castings Available. Each Sheave Is Fitted With An Iron Bronze Bushing That Take Either 1-1/4" Or 3/4" Diameter Shafts. All Dcd Design/Cable Spinning Equipment Sheave Axles Are Made From Hi-Strength Chrome Plated Shafting. With Almost Twice The Load Bearing Capability Of Regular Bronze Bushings, The Dcd Design/Cable Spinning Equipment Sheaves Are Designed To Take The Full Load At Either Entry Or Exit Points Of The Pull. Dcd Design/Cable Spinning Equipment Also Offers Flat Bottom Sheaves. The Purpose Of These Sheaves Is To Allow Parallel Seating Of 3 Cables On The Sheave – This Prevents ’Bunching’ Of The Cables Which In Turn Often Causes One Or More Of Them To Ride Up The Side Of A Standard Radiused Sheave, Possibly Causing Damage To The Cable Jackets.
All Dcd Design/Cable Spinning Equipment Sheaves Are Cast From 356-T6 Aluminum. This Is A Heat Treated Material Giving Over 33,000 Lbs Of Tensile Strength Making It One Of The Strongest Types Of Aluminum Castings Available. Each Sheave Is Fitted With An Iron Bronze Bushing That Take Either 1-1/4" Or 3/4" Diameter Shafts. All Dcd Design/Cable Spinning Equipment Sheave Axles Are Made From Hi-Strength Chrome Plated Shafting. With Almost Twice The Load Bearing Capability Of Regular Bronze Bushings, The Dcd Design/Cable Spinning Equipment Sheaves Are Designed To Take The Full Load At Either Entry Or Exit Points Of The Pull. Dcd Design/Cable Spinning Equipment Also Offers Flat Bottom Sheaves. The Purpose Of These Sheaves Is To Allow Parallel Seating Of 3 Cables On The Sheave – This Prevents ’Bunching’ Of The Cables Which In Turn Often Causes One Or More Of Them To Ride Up The Side Of A Standard Radiused Sheave, Possibly Causing Damage To The Cable Jackets.