DCD 32100-811F Sheave - Double Hanger 8 Inch Wide X 11 Inch Diameter
Available*
Item # 30509460
Model # 32100-811F
$2,834.76
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Sheaves
Tools
Line Construction- Placing
Blocks-Placing-Prelashing- Overlashing
DCD Design And Manufacturing Ltd
Stringing Block-Line Block-Prelashing Block
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
Dcd 32100-811F Sheave - Double Hanger 8 Inch Wide X 11 Inch Diameter
Dcd 32100-811F Sheave - Double Hanger 8 Inch Wide X 11 Inch Diameter
Part # 32100-811F Description Sheave - Double Hanger 8 Inch Wide X 11 Inch Diameter. Flat Bottom Sheave. One Hook.
Dcd Offers Single Or Double Hangers To Go With Their Series Of Cast Aluminum Sheaves. The Single Hangers Are Provided With A Safety Hook And The Double Hangers Have One Hook And One Pin Through Which A Rope May Be Fed Or Other Items Attached. The Sheaves Are All Cast Aluminum With Machined Faces And Bores. They Are Then Fitted With High Load Iron-Bronze Flanged Bushings. All Parts Are Designed To Take 10,000 Lb Line Load Allowing For A 3:1 Safety Factor. One Feature Of The Hangers Is The Ease With Which They Are Assembled To Either A Sheave Or A Quadrant. A Simple Pin With A Handle At One End And A Locking Pin At The Other Does The Job. It Should Be Noted That The Handle At One End Of The Pin May Be Used To Support The Hanger In A Horizontal Position Should That Be Necessary. * F Designates Flat Bottom Sheave. Note: Double Hangers Are Supplied With One Hook
Dcd 32100-811F Sheave - Double Hanger 8 Inch Wide X 11 Inch Diameter
Part # 32100-811F Description Sheave - Double Hanger 8 Inch Wide X 11 Inch Diameter. Flat Bottom Sheave. One Hook.
Dcd Offers Single Or Double Hangers To Go With Their Series Of Cast Aluminum Sheaves. The Single Hangers Are Provided With A Safety Hook And The Double Hangers Have One Hook And One Pin Through Which A Rope May Be Fed Or Other Items Attached. The Sheaves Are All Cast Aluminum With Machined Faces And Bores. They Are Then Fitted With High Load Iron-Bronze Flanged Bushings. All Parts Are Designed To Take 10,000 Lb Line Load Allowing For A 3:1 Safety Factor. One Feature Of The Hangers Is The Ease With Which They Are Assembled To Either A Sheave Or A Quadrant. A Simple Pin With A Handle At One End And A Locking Pin At The Other Does The Job. It Should Be Noted That The Handle At One End Of The Pin May Be Used To Support The Hanger In A Horizontal Position Should That Be Necessary. * F Designates Flat Bottom Sheave. Note: Double Hangers Are Supplied With One Hook
