POLYWATER HS-640 5-Gal HydraSol Cable Gel Remover 02786800575 SOLD PER Pail
Available*
Item # 11175001
Model # HS-640
$275.31
financing available. Learn More
* Notes on Availability:
If item is in stock, it will ship same day.
Lead times vary, contact us for more info.
(Images may not be of the actual item being sold.)
- Product Description
- You Might Also like
- Recently Viewed
Generic
Class
Group
Type
Manufacturer
LOT
Cleaner
Material and Supplies
Cleaners- Solvents
Cleaning supplies
Polywater
Warning: This product can expose you to chemicals, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.govProduct Description
AMERICAN POLYWATER HS-640 5-Gal HydraSol® Cable Gel Remover 02786800575 SOLD PER Pail
HydraSol® Cable Gel Remover Safe, Effective, Water-based Cleaner For the Removal of Cable Filling Greases HydraSol® Remover cleans cable filling gels, flooding compounds, PE/PJ & ETPR greases, fluxes, and ickypic off wires, hands, and splicing tools
Maximum Solvency Power on PE/PJ or ETPR Greases
Rinses Off With Water--Water Base
Good For Multiple Cleanings
No Chlorinated Solvent, CFC, or Glycol Ether Content
Available in a Variety of Convenient Packages
HydraSol® Gel Remover is a unique approach in cable cleaning materials. It is a water-based solvent cleaner that offers unique safety and handling. HydraSol® Gel Remover is amazingly effective at dissolving and removing cable filling greases (ickypic).
HydraSol® Remover's components are on the FDA's and FEMA's generally recognized as safe lists. They have low toxicity whether by oral, inhalation or dermal exposure. The product is water-based (over 50% water).
HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly used up. HydraSol® Remover is good for multiple cleaning for economy and efficiency.
HydraSol® Remover is easy to rinse off hands and tools. Dissolved grease isn't redeposited as the cleaner residue dries.
Unique Spray Bottles - HydraSol® Gel Remover is available in environmentally safe, refillable, trigger spray bottles (adjustable for stream or spray).
Durable Saturated Wipe - HydraSol® Remover is available in a presoaked towelette. The large, tear-resistant towelette comes in an easy-open foil pack. The towelette is especially effective for smaller cleaning jobs. Saves money over bulk use with rags. And now available in handy 72-count self-dispensing and resealable canisters!
Note: For cleaning the actual glass fibers prior to splicing, we recommend SqueekyKleen™ Cleaner and QuicKleen™
SPECIFICATIONS
Solvency Power: At 68°F (20°C), will dissolve .020 (.5 mm) film of PE/PJ or ETPR grease completely from cable jacket with less than two minutes of vigorous agitation (no wiping).
Water Base: Greater than 50% water content.
Appearance: Milky-white liquid. Requires shaking before use.
Percent non-volatile solids: Less than 3%
Chlorinated Solvent, CFC, or Glycol Ether Content: None
Clean-up: Can be rinsed off with water.
Combustibility: Will self-extinguish in under five seconds when wicked onto 00 steel wool and ignited.
HydraSol® Cable Gel Remover Safe, Effective, Water-based Cleaner For the Removal of Cable Filling Greases HydraSol® Remover cleans cable filling gels, flooding compounds, PE/PJ & ETPR greases, fluxes, and ickypic off wires, hands, and splicing tools
Maximum Solvency Power on PE/PJ or ETPR Greases
Rinses Off With Water--Water Base
Good For Multiple Cleanings
No Chlorinated Solvent, CFC, or Glycol Ether Content
Available in a Variety of Convenient Packages
HydraSol® Gel Remover is a unique approach in cable cleaning materials. It is a water-based solvent cleaner that offers unique safety and handling. HydraSol® Gel Remover is amazingly effective at dissolving and removing cable filling greases (ickypic).
HydraSol® Remover's components are on the FDA's and FEMA's generally recognized as safe lists. They have low toxicity whether by oral, inhalation or dermal exposure. The product is water-based (over 50% water).
HydraSol® Remover softens, removes and suspends cable filling greases. The solvent remains active and is only slowly used up. HydraSol® Remover is good for multiple cleaning for economy and efficiency.
HydraSol® Remover is easy to rinse off hands and tools. Dissolved grease isn't redeposited as the cleaner residue dries.
Unique Spray Bottles - HydraSol® Gel Remover is available in environmentally safe, refillable, trigger spray bottles (adjustable for stream or spray).
Durable Saturated Wipe - HydraSol® Remover is available in a presoaked towelette. The large, tear-resistant towelette comes in an easy-open foil pack. The towelette is especially effective for smaller cleaning jobs. Saves money over bulk use with rags. And now available in handy 72-count self-dispensing and resealable canisters!
Note: For cleaning the actual glass fibers prior to splicing, we recommend SqueekyKleen™ Cleaner and QuicKleen™
SPECIFICATIONS
Solvency Power: At 68°F (20°C), will dissolve .020 (.5 mm) film of PE/PJ or ETPR grease completely from cable jacket with less than two minutes of vigorous agitation (no wiping).
Water Base: Greater than 50% water content.
Appearance: Milky-white liquid. Requires shaking before use.
Percent non-volatile solids: Less than 3%
Chlorinated Solvent, CFC, or Glycol Ether Content: None
Clean-up: Can be rinsed off with water.
Combustibility: Will self-extinguish in under five seconds when wicked onto 00 steel wool and ignited.
