TEMPO 140D A-BUG FILTERED TONE PROBE SPEAKER PROBE
Product Description
A-Bug Model 140 Tone Probe
The Model 140 Tone Probe is a hand-held probe used by telephone or LAN construction, installers and splicers to detect audio tones used for identification, cable tracing or repair. The Model 140 will give an audible and visual indication if a tone is detected. The Model 140 detects frequencies in the range from 500 to 1000 Hertz.
A-Bug brand Model 150 Tone Sender The A-Bug brand Model 150 Tone Sender is a miniature, tone generator that sends a modulated two-frequency alternating tone on working or non-working pairs or individual conductors for detection with the Model 140 Tone Probe or other similar probes. It also tests lines for voltage including ringing, polarity, continuity, shorts, grounds and crosses; and also provides talk battery for communications between two locations. Two outputs are provided, an alligator clip output suitable for connection to wires or terminals, and an RJ-11 output for plugging into RJ-11 jacks.
The Model 150 can send two types of tone. The factory setting is the alternating high/low (900/800 Hz) tone modulated at 2.5 Hz. If desired, an internal switch changes the output to a solid tone. The unit uses a standard 9 volt battery and battery life is typically 100 hours with an alkaline battery.
Features:
Simple Operation On/Off Switch LED Indicator Speaker Adjustable Gain Control Headphone Jack Bevel-edged Probe Tip (An extra tip is stored in the battery compartment lid)
Specifications: Size: 2.4 x 2.2 x 1.2 inches (61 x 56 x 30 mm) Weight: 4.6 oz. (130 grams) including battery Operating temperature: 0 to 125 degrees F (-18 to 50 degrees C) Storage temperature: -40 to 140 degrees F (-4 to 60 degrees C) Power: One NEDA type 1604 9V battery (alkaline recommended) Battery life: 100 hours Case material: Glass fiber reinforced Nylon 6/6 Outputs: Two clips or one RJ-11 (in parallel) Tone output level: +7.5 dBm typical Tone output frequency: User selectable 800 Hz solid tone or 800/900 Hz alternating high/low tone modulated at 2.5 Hz Output impedance: 700 ohms nominal Maximum Talk current (leads shorted): 23 ma LED on resistance in Continuity mode: 30 kohms (dim LED) to 3 kohms (bright LED) LED on voltage in Off or Tone mode: 3 volts or greater Ringing voltage indication: LED flashes with 20 Hz 80 volt peak-to-peak voltage superimposed on 50 VDC
Ordering Info:
Description Cat (UPC) No.
140 Tone Probe 140 (60760)
Accessories:
140D Tone Probe – Discriminator probe not only functions like a Model 140, it has a 577 Hz filter mode that knocks out the toughest noise. 140D (60781)
150 Tone Sender – Supplies Tone for identification and repair. Also provides continuity, polarity and status identification. 0150-0001-4 (60779)
150P Tone Sender – Includes the sender with popper-style clips. 150P (60761)
150D Tone Sender – Tone sender that generates 577 Hz tone in three user-selectable cadences. Has high and low power modes. 150D (60782)
360 Probe Holster – Black holster for carrying Model 140 Tone Probe. 360 (60762)
361 Headphone – Lightweight headset provides excellent audio quality by plugging into the Tone Probe. 361 (60778)
362 Sender Holster – Holster for carry Model 150. Includes swivel snap. 362 (60763)
240H Tone Probe Kit – Includes Models 140H, 150, 360, 361, 362 and two batteries.
240PH Tone Probe Kit – Includes Models 140P, 150, 360, 361, 362 and two batteries.
240D Discriminator Tone Probe Kit – Includes Models 140D and 150D
0140-0001-11 / 60781
***BEING REPLACED BY 200XP***
A-Bug brand Model 150 Tone Sender The A-Bug brand Model 150 Tone Sender is a miniature, tone generator that sends a modulated two-frequency alternating tone on working or non-working pairs or individual conductors for detection with the Model 140 Tone Probe or other similar probes. It also tests lines for voltage including ringing, polarity, continuity, shorts, grounds and crosses; and also provides talk battery for communications between two locations. Two outputs are provided, an alligator clip output suitable for connection to wires or terminals, and an RJ-11 output for plugging into RJ-11 jacks.
The Model 150 can send two types of tone. The factory setting is the alternating high/low (900/800 Hz) tone modulated at 2.5 Hz. If desired, an internal switch changes the output to a solid tone. The unit uses a standard 9 volt battery and battery life is typically 100 hours with an alkaline battery.
Features:
Simple Operation On/Off Switch LED Indicator Speaker Adjustable Gain Control Headphone Jack Bevel-edged Probe Tip (An extra tip is stored in the battery compartment lid)
Specifications: Size: 2.4 x 2.2 x 1.2 inches (61 x 56 x 30 mm) Weight: 4.6 oz. (130 grams) including battery Operating temperature: 0 to 125 degrees F (-18 to 50 degrees C) Storage temperature: -40 to 140 degrees F (-4 to 60 degrees C) Power: One NEDA type 1604 9V battery (alkaline recommended) Battery life: 100 hours Case material: Glass fiber reinforced Nylon 6/6 Outputs: Two clips or one RJ-11 (in parallel) Tone output level: +7.5 dBm typical Tone output frequency: User selectable 800 Hz solid tone or 800/900 Hz alternating high/low tone modulated at 2.5 Hz Output impedance: 700 ohms nominal Maximum Talk current (leads shorted): 23 ma LED on resistance in Continuity mode: 30 kohms (dim LED) to 3 kohms (bright LED) LED on voltage in Off or Tone mode: 3 volts or greater Ringing voltage indication: LED flashes with 20 Hz 80 volt peak-to-peak voltage superimposed on 50 VDC
Ordering Info:
Description Cat (UPC) No.
140 Tone Probe 140 (60760)
Accessories:
140D Tone Probe – Discriminator probe not only functions like a Model 140, it has a 577 Hz filter mode that knocks out the toughest noise. 140D (60781)
150 Tone Sender – Supplies Tone for identification and repair. Also provides continuity, polarity and status identification. 0150-0001-4 (60779)
150P Tone Sender – Includes the sender with popper-style clips. 150P (60761)
150D Tone Sender – Tone sender that generates 577 Hz tone in three user-selectable cadences. Has high and low power modes. 150D (60782)
360 Probe Holster – Black holster for carrying Model 140 Tone Probe. 360 (60762)
361 Headphone – Lightweight headset provides excellent audio quality by plugging into the Tone Probe. 361 (60778)
362 Sender Holster – Holster for carry Model 150. Includes swivel snap. 362 (60763)
240H Tone Probe Kit – Includes Models 140H, 150, 360, 361, 362 and two batteries.
240PH Tone Probe Kit – Includes Models 140P, 150, 360, 361, 362 and two batteries.
240D Discriminator Tone Probe Kit – Includes Models 140D and 150D
0140-0001-11 / 60781
***BEING REPLACED BY 200XP***
There is a $3 packaging charge on ALL orders. Instock orders ship same day all others ship in 3-7 days. Follow these links for more information about Who We Are, Repair Form , Your Order, Shipping Time Table, Sample Shipping rates, Credit Application-PDF , Credit Application-text , Sample Shipping rates
On Sale Now , Our Privacy Policy and Our Warranty,We are always looking for some items we need to buy. Before you leave be sure and check out our discounted surplus stock that we are looking for offers on and our Eschultz BLOG.
Thank you for visiting us. Please Contact Us or (800)422-4823 or if we can be of any further assistance.
